This change combines the rms_norm+mul and rope+view+set_rows fusions to
allow fusing the whole sequence together. This comes up in Qwen3, Bailing,
and some other models.
The std::map pipeline_flash_attn_f32_f16 could be searched and inserted at the
same time, which needs to hold the lock. To be safe, hold the lock for all of
ggml_vk_load_shaders.
* vulkan: remove the need for the dryrun
Allocate pipelines and descriptor sets when requested.
Reallocate the prealloc buffers when needed, and flush any pending work
before reallocating.
For rms_partials and total_mul_mat_bytes, use the sizes computed the last time
the graph was executed.
* remove dryrun parameters
* vulkan: fuse mul_mat+add and mul_mat_id+add_id
The fusion is only applied for the mat-vec mul paths.
* Apply suggestions from code review
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* fix 32b build
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Experimenting crash fix
* added assert for aborting and fixed comment
* changed to check if a pipeline is empty or not
* Moved function in class definition
* replaced with is_empty
* Modified is_empty to check only unaligned pipelines
This pattern appears in a lot of models, the rope operation is applied right
before storing into the KV cache (usually on the K tensor).
Add a path to some of the rope shaders that computes the destination address
based on the set_rows tensor. Compile variants of the shader with D_TYPE of
f16 (the usual KV cache type).
Add a src3 operand to ggml_vk_op_f32 - sometimes rope uses three srcs and needs
the fourth for the row indices.
Add fused_ops_write_mask to indicate which intermediate tensors need to write
their results to memory. Skipping writing the roped K value helps to allow more
nodes to run concurrently.
Add logic to ggml_vk_graph_optimize to make ROPE+VIEW+SET_ROWS consecutive. It
rarely starts out that way in the graph.
Add new backend tests.
* vulkan: Update topk_moe fusion to handle gpt's late softmax
Based on #16649.
* Add ggml_check_edges
* Add sync logging to show fusion effects
* handle clamp added in #16655
* Update ggml/src/ggml-impl.h
Co-authored-by: Diego Devesa <slarengh@gmail.com>
* ggml : fix interpolate with align-corners and ne=1
* avoid division by zero if one of the spatial dimensions is 1
* cpu, cuda, opencl returned correct result anyway due to clamp
* vulkan didn't clamp for align-corners so results were broken
* fix clang warning
* fix: deduplicate and deprioritize Microsoft Direct3D12 vulkan devices from the `vulkan-dozen` driver
* style: indent
* fix: decrease priority
* fix: switch to `||`
ggml_vk_create_buffer_temp is not used anywhere, and it is the only
caller for ggml_vk_pool_malloc.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* vulkan: implement SSM scan operation
Add State Space Model scan operation to the Vulkan backend.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* vulkan: implement SSM conv operation
Add State Space Model conv operation to the Vulkan backend.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
---------
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* vulkan (DRAFT): split shader generation by GLSL source file, to improve incremental build times
* support dep-files so shaders are recompiled if their included files change
* rename shader files which are used as "headers" to use .glsl extension
* move glslc extension detection shaders to separate folders
* the above is to prevent them from getting glob'd with the actual compute shaders that need to be compiled
* vulkan : only write embedded shader .hpp/.cpp when they change
* avoid recompiling ggml-vulkan.cpp when editing shaders
* pass single --source argument instead of --input-dir & --filter to shader gen
* check for source file match earlier
* fix hang in vulkan-shaders-gen when there are compilation errors
* early out did not decrement compile_count
* clean up
* fix glslc integer dot product test
* unconditionally write the embedded shader cpp output
* replace output filepath in generated dep-files to match output in CMakeLists
---------
Co-authored-by: Jeff Bolz <jbolz@nvidia.com>
* vulkan: Replace uses of maxMemoryAllocationSize and VK_WHOLE_SIZE
Replace maxMemoryAllocationSize check with maxBufferSize when creating buffers.
The maxMemoryAllocationSize limit is a "soft" limit and allocations can succeed
beyond that limit. This allows > 4GB buffers to be allocated on some
implementations (e.g. NVIDIA) and tensors this large can be used for im2col
and mul_mat.
For temporary buffers (prealloc_x/y/etc) check against maxStorageBufferRange.
I'm not sure this check is ideal, but we always use these buffers as a single
full size binding and the limit may be smaller than maxMemoryAllocationSize
or maxBufferSize, so I think this is reasonable.
Replace descriptor range uses of VK_WHOLE_SIZE with a manually computed range.
The maxStorageBufferRange may be smaller than the maxBufferSize or
maxMemoryAllocationSize (and the Vulkan spec warns about this in a note) and
it's invalid usage if VK_WHOLE_SIZE computes a range larger than
maxStorageBufferRange.
With this change, it should be possible to generate videos using wan networks
in stable-diffusion.cpp.
* vulkan: Add env var GGML_VK_FORCE_MAX_BUFFER_SIZE and use stoull
When computing sinks, the cm1 shader was looping r from 0 to Br rather than
to rows_per_thread. I must have copied this from the scalar path (where it is
correct), and somehow it wasn't causing failures on current drivers.
* vulkan: 64-bit im2col
Add variants of the im2col shaders that use buffer_device_address/buffer_reference,
and use 64-bit address calculations. This is needed for large convolutions used in
stable-diffusion.cpp.
* fix validation error for large im2col
* vulkan: handle mat_mul with A matrix > 4GB
This change splits mat_mul operations with huge A matrix into chunks in the M
dimension. This works well for stable-diffusion use cases where the im2col
matrix has very large M.
Fix the order of setting the stride in mul_mm_cm2 - setting the dimension
clobbers the stride, so stride should be set after.
* build fixes
The "Clamp" spec constant is already based on whether KV is a multiple of Bc,
so use that to control whether bounds checking is performed. Add bounds checking
to the scalar and coopmat1 paths. Coopmat2 didn't need any changes (the K/V
tensors are already optionally clamped, nothing else needed to be changed).
The dequantize functions are copy/pasted from mul_mm_funcs.comp with very few
changes - add a_offset and divide iqs by 2. It's probably possible to call
these functions from mul_mm_funcs and avoid the duplication, but I didn't go
that far in this change.
* implement set_rows with i32 index
* template fix
* test quantized path
warnings--
* Apply suggestions from code review
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* forgotten name change
* deduplicate cuda/sycl and test-fix
* indent++
* vulkan: support set_rows with i32 index type (#16162)
* disable i32 index for webgpu for now
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
Co-authored-by: Jeff Bolz <jbolz@nvidia.com>
* Vulkan: add conv_transpose_2d operation
* Vulkan: fix typo in conv_transpose_2d shader(s0mp, s0L, s1mp, s1L)
* Vulkan: fix incorrect indentation in conv_transpose_2d shader
* Vulkan: add checking the push constants size limit and reuse conv2d_mm.comp for conv_transpose_2d operation
* Vulkan: revert the order of the index calculation and bound check in conv_2d shader
* Vulkan: explicity check push constants limit in supports_op() for conv_transpose_2d operation.
* Vulkan: remove unnecessary lower bound checks for H/W_idx in the conv_2d shader.
* vulkan: optimize UMA buffer operations and fix driver hangs
The previous implementation was blocking the GPU for extended periods,
causing the i915 driver to reset the context due to the hangcheck
protection.
[32628.443070] i915 0000:00:02.0: [drm] GPU HANG: ecode 12:1:85dffffb, in llama-server [194114]
[32628.443091] i915 0000:00:02.0: [drm] llama-server[194114] context reset due to GPU hang
* vulkan: implement deferred_memset on UMA
---------
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* vulkan: Change the mul_mm shared memory and register caching system to use vec2 instead of scalars, to enable using dot2 instructions
* use fma instead of dot to fix Nvidia and Apple performance issues
